Harness manufacturing process

Harness fabrication i𒐪s divided into the following parts:
1. Wire cutting is to cut the wire according to the size required by the process. Some automatic 𓂃crimping equipment can cut the wire and crimp at the same time, such as c551 in Xiaosi,🔯 555 in kumais, Japan, etc;
2. Terminal crimping crimp the cut wires to the terminals 🌳with a small crimping machine (there are few soldering now). Sometimes multiple wires can be crimped at one terminal;
3. Sub assembly: the 🤡crimped wires are sub assembled according to the sub assembly process requirements, that is, the termi🧸nals are inserted into the sheath
4. Assemble the sub assembled sma♔ll assembly on the drawing board according to the circuit direction (bundle with adhesive tape or tension tape, that is, harness)
5. For loop detecti♛on, conduct the conduction test on the special loop detection equipment according to the preset loop direction (without load, so it will not affect the function of the harness)
6. Appearance inspection: visually inspect whetherꦬ some appearance parts meet the standard and lack accessorieಌs.